油壓機械式機構，高穩定性
Oil Pressure Mechanical Structure
High Stability
*確認拉力計規格是否與主軸夾爪的規格相對應。
* Check the specification of pull force gauges should
correspond the specification of spindle clamping unit.
*量測環境溫度需控制在室溫25±1℃內。
*Measuring environment’s temperature should be controlled within 25 ± 1℃.
*將拉力計及主軸前端錐度部位擦拭乾淨後，夾持拉力計即可。
* Clean the pull force gauges and front-end taper parts and then
clamp the pull force gauge.
1)HSK63A/E拉力計的調整方式如左圖所示：
Adjustment of HSK63A/E pull force gauge shown on the right.
2)為確保量測數值的正確性，拉力計須在有預拉的情況下使用。
To ensure the accuracy of measurement the pull force;
gauge has to be used in the pre-pull condition.
3)實測拉力：以指針?biāo)竿馊χ當?shù)值X10，即為實測拉力(kg-f)
The finger indicated the value of the outer ring X 10;
the value is pull force measured |
|
手機站
您當前位置是：產品大全 >> 五金工具 >>
刀具、夾具
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。
聯系信息
