 |
樂泰無影膠廠商丨UV膠|無影膠|紫外線膠|膠水
| 聯系人：王小姐
女士 (客服) |
| 電 話：021-51693135 |
手 機：13052326431  |
 |
|
 |
|
| 樂泰3103 |
樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103
樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103
樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103
技術服務熱線：021-51693135 / 021-22818476
PRODUCT DESCRIPTION
樂泰®
3103™ provides the following product
characteristics:
Technology Acrylic
Chemical Type Acrylated urethane
Appearance (uncured) Transparent to slightly hazy liquidLMS
Components One component - requires no mixing
Viscosity Medium, thixotropic
Cure Ultraviolet (UV)/ visible light
Cure Benefit Production - high speed curing
Application Bonding
Flexibility Enhances load bearing & shock
absorbing characteristics of the bond
area.
樂泰®
3103™ is primarily designed for bonding
polycarbonate to itself, while not inducing stress cracking under
typical molded stress levels. 樂泰®
3103™ cures rapidly
to form flexible, transparent bonds when exposed to ultraviolet
light and/or visible light of sufficient irradiance and has shown
excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of 樂泰®
3103™ reduces the migration of liquid
product after application to the substrate.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.13
Refractive Index 1.48
Flash Point - See MSDS
Viscosity, Brookfield - RVT, 25 °C, mPa·s (cP):
Spindle 5, speed 20 rpm 8,000 to 14,500LMS
TYPICAL CURING PERFORMANCE
樂泰®
3103™ can be cured by exposure to UV and/or
visible light of sufficient intensity. To obtain full cure on
surfaces exposed to air, radiation @ 220 to 260 nm is also
required. The speed of cure will depend upon the UV intensity
and spectral distribution of the light source, the exposure time
and the light transmittance of the substrates.
樂泰 3103 is primarily designed for |
 |
| |
| 樂泰無影膠廠商丨UV膠|無影膠|紫外線膠|膠水 |
|
| 電 話： |
021-51693135 |
| 傳 真： |
021-51693136 |
| 移動電話： |
13052326431 |
| 公司地址： |
中國上海閔行區uv膠水公司 |
| 郵 編： |
200030 |
| 公司主頁： |
http://uvjiao.qy6.com.cn( 加入收藏) |
|
|
|
 |
|
| 其它產品信息 |
- ·粘亞克力的膠水，亞克力膠水廠家，膠水
- ·uv膠封裝，樂泰UV紫外線膠水廠家
- ·PET展覽柜粘結
- ·塑料粘接uv膠
- ·特富龍薄膜粘接劑 特富龍薄膜膠水 特富
- ·光學水膠 觸摸顯示屏膠水
- ·uv水膠，樂泰無影膠UV膠廠家
- ·p+r手機按鍵uv膠，樂泰無影膠批發
- ·特氟龍薄膜膠水 特氟龍粘接劑 氟塑料薄
- ·光固化膠 增亮膜，UV膠紫外線膠水廠家
- ·loca光學膠，樂泰UV膠，樂泰UV膠，紫外
- ·uv彩盒膠
- ·灌封膠 低粘度灌封膠 ab灌封膠 耐高溫
- ·光固膠，樂泰進口膠水
- ·高透明光固化膠水，樂泰UV膠，紫外線膠
- ·環保膠帶（不干膠）清洗劑 Deamcheas
- ·uv厭氧膠，樂泰UV膠水，上海杭州蘇州廠
- ·美國液體光學膠loca，紫外線膠水，樂泰
- ·電容觸摸屏膠，UV膠紫外線膠水廠家，樂
- ·氟塑料薄膜粘結劑 PTFE粘接劑
- ·UV膠 手機電腦筆記本磁鐵轉軸粘接膠粘
- ·不發白瞬干膠,不發白瞬間膠,不發白瞬間
- ·醫用針頭UV膠，醫用膠水針頭膠水
- ·氟塑料薄膜膠水 鐵富龍粘接劑 Teflon薄
- ·玻璃光固膠 手機電腦筆記本磁鐵轉軸粘
- ·紫外線固化膠水，樂泰UV膠水，上海杭州
- ·有機玻璃展覽柜粘接
- ·高硬度UV膠水，進口樂泰無影膠專賣
- ·金屬u(mài)v膠
- ·無白化瞬間膠,無白化瞬間膠水,無白化瞬
- ·醫用針頭無影膠，醫用膠水針頭膠水
- ·loca 光學膠，樂泰無影膠UV膠廠家
- ·PET展柜粘接
- ·注射器針頭專用UV膠水
- ·特富龍膠水 鐵富龍膠水 聚四氟乙烯膠水
- ·亞克力膠粘劑，亞克力膠水廠家，膠水批
- ·聚四氟乙烯薄膜粘結劑 Teflon薄膜粘接
- ·抗污抗指紋表面處理劑 手機屏幕抗指紋
- ·上海UV膠,上海UV膠水,上海紫外線膠,上
- ·uv光療膠
- ·PTFE膠水 特氟龍粘接劑
- ·觸摸顯示屏膠水，UV膠紫外線膠水廠家，
- ·電容屏 水膠，樂泰無影膠UV膠廠家
- ·上海特氟龍膠,特氟龍膠水,上海特富龍膠
- ·聚四氟乙烯薄膜粘結 鐵氟龍薄膜粘接劑
- ·進口uv膠
- ·氟塑料粘接劑 聚四氟乙烯粘接劑
- ·PET展出柜膠水
- ·uv固化粘合劑
- ·uv紫外線膠水
- ·有機硅導熱膠 雙組份聚氨酯灌封膠 汽車
- ·觸摸屏水膠，紫外線膠水，樂泰膠水
- ·紫外線光固化膠公司,紫外線光固化膠水
- ·loca膠水，膠水上海廠商，杭州蘇州經銷
- ·單組分環氧樹脂針頭膠
- ·工業UV膠水 PCB三防漆 UV紫外線無影膠
- ·Teflon薄膜膠水 特氟隆膠水
- ·超聲波清洗劑
- ·uv紫光膠紫外線 膠/紫外線光固膠/紫外
- ·uv紫外膠 黑色紫外線膠/紅色紫外線膠/
|
|
|
|
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。